Mitsubishi 60000 BTU Smart 8 Zone Ductless Heat Pump Mini Split AC System | Condenser MXZ-SM60NAM-U1 (2024)

This system includes one fully charged multizone outdoor heat pump condensing unit for up to 60000 BTUs and up to 8 indoor units. This system requires a minimum of 2 indoor units to function. We do not recommend combining units with combined BTUs over the maximum limit of 78,000 BTUs.

Under the terms of all manufacturer's warranty and to comply with federal refrigerant handling laws, it is required that the system be checked, started up and signed-off on by a licensed air conditioning/heating contractor prior to use. Failure to comply with this provision will void all factory warranties. Keep a copy of the installation ticket for your records. Please ensure that all supply and return ductwork is properly sized and that a permit is obtained (where required). Always conform with applicable local and state codes. Electrical connections should only be made by a licensed electrical contractor. Unqualified persons should never attempt installation of this or any HVAC system.

Mitsubishi Mini Split Smart Multizone Heat Pump AC Condenser - MXZ-SM60NAM-U1 Overview

• Compatible with M- and P-Series and CITY MULTI® indoor units. Branch box required for connection with M- and P-Series
• Variable speed INVERTER-driven compressor
• Seacoast protection on heat exchanger and base panel (rated for 2,000 hrs in accordance with ASTM B117 testing)
• Thermal Differential 1°F (with PAC-MKA32/52BC only)
• Optional base pan heater
• Quiet outdoor unit operation rated sound pressure as low as 49 dB(A)
• High pressure protection
• Compressor thermal protection
• Compressor overcurrent detection
• Fan motor overheating/voltage protection

MSZ-GS Series Wall-Mounted Air Handler Features

• Slim wall-mounted indoor units provide zone comfort control
• The outdoor unit powers the indoor unit, and should a power outage occur, the system is automatically restarted when power returns
• Multiple fan speed options: Quiet, Low, Medium, High, Super-high, Auto
• Multiple control options available:
  • - Hand-held Remote Controller (provided with unit)
  • - kumo cloud® smart device app for remote access
  • - Third-party interface options- Wired or wireless controllers
• Hot-Start Technology: no cold air rush at equipment startup or when restarting after Defrost Cycle
• Quiet operation
• Smart Set: recalls a preferred preset temperature setting at the touch of a button

Mitsubishi SVZ-KP Series Air Handler Overview

SVZ-KP Connection Rules

• Up to 2 SVZ-KP’s may be connected to this system*.
• When 2 SVZ-KP’s are connected, no additional indoor units can be used*.
• When 1 SVZ-KP is connected, additional indoor units can be connected.
• When 1 SVZ-KP is connected, total connected capacity must not exceed 130%.

*No limitation to the number of units connected when the SPTB1 accessory is used, total connected capacity must not exceed 130%.

Features:

• Multi-position air handling unit
• Multi-Position installation without any additional kits
• Quiet operation
• Selectable external static pressure settings with capabilities up to 0.80 In. W.G.
• Auto fan speed control: Low, Medium, High
• Indoor unit powered from outdoor unit using A-Control (Optional)
• Auto restart following a power outage

Mitsubishi SLZ-KF Series Ceiling Cassette Features

• Four-way 2'x2' ceiling-cassette indoor unit for ceiling recessed applications
• Built-in drain mechanism for condensate removal; lifts to 19-11/16"
• Wide air-flow pattern for better air distribution
• Design features ventilation air intake knockout
• Long-life air filter included with indoor unit
• Indoor unit powered from outdoor unit using A-Control
• Choice of fan speed: Low, Medium, High
• Automatic restart following a power outage

SEZ-KD Series Horizontal-Ducted Air Handler Features

• Horizontal-ducted indoor unit for concealed applications
• Ultra thin body: 7-7/8" high
• Built-in drain mechanism for condensate removal; lifts to 21-11/16"
• Air filter is included with indoor unit
• Quiet operation - as low as 23 dBA
• Indoor unit powered from outdoor unit using A-Control
• AUTO fan speed control
• Automatic restart following a power outage

MLZ-KP Series One Way (Recessed) Ceiling Indoor Unit Features

• Available sizes: 9, 12, 18 kBtu/h
• Fits between 16” joists spacing
• Stylish, square design panel
• Built-in condensate lift mechanism (19.6”)
• Serviceable from the bottom (electrical and flare connections)
• Adjustable fan speeds and vane directions
• Washable antibacterial and deodorizing filter
• Multiple control options available:
  • - Handheld Remote Controller (provided with unit)
  • - kumo cloud® smart device app for remote access
  • - Third-party interface options
  • - Wired or wireless controllers
• Pocket inside the access panel for kumo cloud® Wireless Interface

MFZ-KJ Floor Mounted Indoor Units Overview

Key Features

• HEALTHIER INDOOR AIR - Sophisticated multi-part filtration systems reduce contaminants such as allergens, viruses and bacteria from the air.
• PERFORMANCE IN COLD CLIMATES - Hyper-Heating INVERTER^® technology provides exceptional performance down to -13° F outdoor ambient, with 100% heating capacity at 5° F outdoor ambient.
• WHISPER-QUIET OPERATION - Both the indoor and outdoor units are extremely quiet. Indoor units operate as low as 19 dB(A) - that's quieter than a whisper.
• HIGHLY-EFFICIENT INVERTER TECHNOLOGY - Traditional systems operate on an inefficient cycle of 100% on or 100% off. With Mitsubishi Electric’s INVERTER-driven compressor technology, our systems constantly measure conditions and then adjust compressor and fan speed up or down to maintain the desired temperature.
• EASY-ACCESS, WASHABLE FILTERS - Front panels make it easy to access the filters. Instead of wasting money on new filters several times a year, Mitsubishi Electric indoor units use easy-to-clean, washable filters. You’ll never get caught without a filter again.
• HOT-START TECHNOLOGY - With Hot-Start technology and multi-vane airflow, you get hot air right away and rapid heating of the room.
• REMOTE CONTROL - Wireless controllers are available to program the system around your comfort level and your life's busy schedule. Whether you’re gone for the day or on an extended vacation, you can control your system from just about any smartphone or tablet. You’ll never again have to return to a house that’s freezing cold or blazing hot.

CONTROLLER FEATURES INCLUDE:

• MODE: HEAT, COOL, AUTO, and DRY
• FAN: Adjusts fan speed
• STOP/START: A 12-hour ON/OFF timer
• ECONO COOL: Energy efficient cooling option
• VANE: Sets horizontal vane position
• TIME: Power off timer and clock adjustment
• SMART SET: Programs multiple settings into one quick-press feature. Programs heating set back

MHK2 Overview

MRCH2 REMOTE CONTROLLER SPECIFICATIONS

• Touch panel, Backlit, easy-to-read display
• Used RedLINK™ 3.0 wireless technology
  • - Not compatible with MHK1, MOS1, and MCCH1 RedLINK 2.0 wireless technology environment.
• User functions allow user to set:
  • - On/Off
  • - Operation modes cool, heat, drying, fan
  • - Set temperature (separate dual set points for heat and cool)
  • - Fan speed setting- Airflow direction
• Set temperature range limits (dependent on the system connected):
  • - Cooling from 50° to 99° F
  • - Heating from 40° to 90° F
  • - Auto from 50° to 90° F with dual temperature setting
• MHK2 Scheduling options:
  • - No Schedule
  • - MO-SU = Every day the same
  • - MO-FR, SA, SU = 5-1-1 schedule
  • - MO-FR, SA-SU = 5-2 schedule
  • - Each Day = Every day individual
  • - Allow kumo cloud to be schedule holder
• Hold function
• Temporary or Permanent schedule override
• Lockout:
  • - On
  • - Off
  • - Mode
  • - Fan Speed
  • - Set point
  • - Vane Direction
• Day/Time display with a 12 or 24-hour clock
• Supports both Fahrenheit and Celsius
• RedLINK™ Wireless Connection Status
• Filter sign display
• Diagnostics: Displays and records error codes
• Adjustable auto mode deadband
• Space temperature offset adjustment
• Space humidity offset adjustment
• Hide (on screen only)
  • - Indoor temperature
  • - Indoor humidity
• Temperature Sensing Source
  • - MHK2
  • - Indoor Unit
  • - RedLINK Wireless Indoor Air Sensor (IAS)
  • - Average of MHK2 and RedLINK Wireless Indoor Air Sensor (IAS)
• Indoor Humidity Source
  • - MHK2- RedLINK Wireless Indoor Air Sensor (IAS)
  • - Average of MHK2 and RedLINK Wireless Indoor Air Sensor (IAS)
• Improved indoor unit function code list
  • - Indoor unit type
  • - Expanded to 28 indoor unit codes
• Reset to factory default
• Uses two “AA” alkaline batteries (included)
• Dimensions: 4-5/64” x 4-5/64” x 1-1/16” (104 x 104 x 27 mm)
• Operating Ambient Temperature: 32° to 120° F (0° to 48.9° C)
• Operating Relative Humidity: 5% to 90%

MIFH2 WIRELESS RECEIVER SPECIFICATIONS:

• Included in MHK2 Kit
• Mounts next to or near indoor units to allow MRCH2 Remote Controller operation
• Connects to indoor unit control board with MRC2 Cable
• Dimensions: 3-3/32” H x 1-3/4” W x 39/64” D (74.8 x 44.4 x 15.4 mm)
• Operating Ambient Temperature: -40° to 165° F (-40° to 73.9° C)
• Operating Relative Humidity: 5% to 95%

MRC2 CABLE

• Included in MHK2 Kit in the MIFH2 box
• Connects MIFH2 Wireless Receiver to the CN105 connector on indoor unit control board
• Length: 39